To assure accurate and efficient realization of the project Moselectronproekt arranges preparatory works, which are aimed to examine the current conditions of the production facilities, work out the strategy for the production development and technical upgrade and reconstruction.  

The production audit is carried out to find the most effective solutions. This enables to minimize the risks of the unexpected expenses and enhance the quality of the investments at the very beginning of the project. While auditing the following will be taken into consideration:

• Production organisation
• Production logistics
• Technological solutions
• Equipment specification
• Possibilities to introduce new technologies and modernize production
• Energetic audit (261 Federal Law, drawing up an energetic certificate, target audit) 

To take decision about a format of the future reconstruction or technical upgrade Moselectronproekt prepares the concept, which consists of the following: 

• General characteristics of the new production
• Technical solution justification with a link to the manufactured products
• Technical processes specifications
• Equipment specifications
• Equipment location plans, including 3D modeling
• Facility requirements for the equipment connections
• Requirements for the facilities
• Design recommendations
• Drafts for the building reconstruction and facilities design

Moselectronproekt makes comprehensive examination, which provides you with an evaluation of the building or construction technical conditions based on the analysis of the data received after instrumental control and verifying calculations. In accordance with a result of the comprehensive examination the conclusions and recommendations are provided for the future safe operation, the necessity to facilitate the constructions and the possibilities to reconstruct, re-plan or extensively repair. To carry out the works our specialists use modern and unique tools and equipment, including 3D scanner. 

Scope of Works: 

• Geometrical parameter measurement for the buildings, constructions, components and units
• Geological engineering site surveys (when needed)
• Instrumental detection of the defects and damages, including dynamic parameters
• Evaluation of the factual characteristics of the materials of the major load-bearing structures and components
• Parameters evaluation for the operational environment related to the technological process in the buildings and constructions
• Evaluation of the actual operational loads and effects on the constructions, which are under investigation, taking into account the base ground deformation
• Evaluation of the actual structural model of the building or construction and its components
• Evaluation of the force model related to the load-bearing structures which take the operational load
• Verified calculation of the load-bearing capacity of the building as per results of the examination
• Analysis of the reasons of the defects and damages in the building structures
• Drawing up the final documentation based on the results of the examination

Comprehensive Examination results in the following:   

• Evaluation of the technical state (category of the technical state)
• Examination results justifying the category of the technical state
• Evaluation of the state of the engineering systems, electric mains, communication facilities, sound-proof conditions of the enclosures, noise of the equipment, vibrations and external noise, thermal engineering indicators of the external enclosures
• Results of the examinations proving the evaluation conclusions
• Justification for the most possible reasons of the defects and damages in the constructions, engineering systems, electric mains and communication facilities, reduction of the sound-proof characteristics of the enclosures, heat-insulting characteristics of the external enclosures (if any)
• Design project assignment to restore, facilitate or repair constructions, equipment, mains (if needed)

Moselectronproekt carries out the visual examination, which provides you with the assessment of the technical conditions of the buildings or constructions in accordance with the visual features. 

Scope of Works:

• Models and registers of the defects and damages with a record of their locations and characteristics
• Descriptions and photos of the defective areas
• Results of the inspection for the presence of the characteristic deformations of the buildings (constructions) and separate building’s structures (geometric bow imperfections, sway imperfection, tilts, bends, shifts, skews, breaks, etc)
• Detection of the accident-sensitive areas
• Specified constructional building model
• Detected load-bearing capacities specified with the floors and locations
• Particular characteristics of the nearby areas, vertical planning, organization of the discharge of the surface waters
• A conclusion report with an assessment of the technical state of the constructions determined by the damage level and characteristic damage features

If the results of the visual examination are not sufficient, the comprehensive inspection can be carried out.

Visual Examination results in the following:

• Evaluation of the technical state (category of the technical state) in accordance with GOST 31937-2011 Buildings and constructions
• Rules for the examination and technical state monitoring
• Materials justifying the category of the technical state
• Justification for the most possible reasons of the defects and damages in the constructions (if any)
• Design project assignment to restore or facilitate constructions (if needed)     

Development of the design project assignment:

• Assignment to develop the project documentation (design assignment)
• Technical assignment with the following enclosures:
  
  • The form “ Consideration of the development of the present technologies and introduction of the new technologies”
  • The form “Summary list of the equipment”
  • The form “Short description of the technological equipment”
  • The Form “Equipment allocation plan”

For more information on the subject of the design documentation please contact us. 

Source Data Acquisition for the Design Works

Speed and quality of the design depend not only on the qualification of our engineer team, but also on the results of the preliminary stage, i.e. on the source data acquisition. The lack of the necessary data or documentation delays development of the project documentation and can seriously affect the results of the governmental expertise.      

Moselectroproekt in a close collaboration with your specialists gets the necessary source data and consults on the legal regulating documents.

To estimate the volume of the preparatory works you may learn the list of the source data, which is required to develop the design estimates.

Moselectronproekt is a leading organization in the field of building design, reconstruction of the buildings and structures, production technical upgrade in radio-electronic industries. Our company is a pioneer of the design and creation of complex microelectronic industries in the USSR. We have an experience and potential to design not only complex traditional industries for micro- and radio-electronics, but also unique industries, which do not have analogues in Russia.

• Radio-Electronics 

  
  • PCB production
  • PCB assembly
  • Bandage assemby
  • Inspections

• Microelectronics

  
  • Active and passive components production
  • Production of the substrates, hybrid assembly
  • Cleanrooms

• Applied Industries

  
  • Mechanic works
  • Tool works
  • Composite materials handling
  • Galvanic productions
  • Plastic, rubber, glass handling

• Perspective Industries

  
  • Solar energy batteries
  • LED 
  • OLED-displays
  • MEMS

Moselectronproekt has developed and issued a considerable number of project and working documentation.

Moselectronproekt draws up the necessary project documentation in accordance with the legal requirements.

Why is it profitable and convenient to work with Moselectronproekt?

• Our specialists can draw up design project assignment and technical assignment, collect the necessary source data for design, and consult on the legal regulating documents. This enables to shorten the deadlines at the first stage of the project development, eliminate possible mistakes while designing and passing the expert examination.
• We pay most of the attention to the subject of deep knowledge of the technological processes, which enables to generate precise requirements for the infrastructure, production safety and ecology point. As a result Moselectronproekt guarantees professional preparation of the technological solution chapter as well as the complete project documentation.
• Moselectronproekt has an extensive data base and advanced IT infrastructure. We develop and implement new technologies of automated design based on the modern software, which enables us to complete projects as soon as possible. 
• Moselectronproekt carries out design works in accordance with the national and international standards (when project documentation is prepared for the foreign partners), which provides smooth passing through possible expert examinations.

To carry out building, reconstruction or technical upgrade in accordance with the project documentation it is necessary to develop working documentation, which is used as a basis for building and assembly jobs. The quality of the buildings and constructions depends not only on the professionalism of the builders, but also on the quality of the working documentation. Moselectronproekt has many years of experience of working documentation development and issue for the numerous realized projects. Cooperation with the  contractors guarantees qualified preparation of the working documentation which eases construction and assembly works and provides visualization for the intersection units, passages or other project details. In case of necessity it is possible to provide reference to the model of the area or visualize all the stages of the construction works in detail and with calculated deadlines

 

The main chapters of the working documentation:

◦    Production technology

◦    Technologic communications

◦    General plan and transport constructions

◦    General plan

◦    Architectural solutions

◦    Architectural and building solutions

◦    Interior

◦    Ferroconcrete constructions

◦    Metal constructions

◦    Metal parts constructions

◦    Wood constructions

◦    Water supply and sewerage system

◦    Heating, ventilation, conditioning

◦    Heat-mechanic solutions for the boilers

◦    Air supply

◦    Dust removal

◦    Cold supply

◦    Gas supply (inner devices) 

◦    Power electrical equipment

◦    Electric lightening (inner)

◦    Radio communication, broadcasting, television

◦    Fire-fighting

◦    Fire alarm

◦    Security and fire-security alarm

◦    Hydro technical solutions

◦    Anticorrosive protection of building and constructions

◦    Anticorrosive protection of technological systems, gas liners and pipelines  

◦    Thermal isolation of the equipment and the pipelines

◦    Roads

◦    Railway lines

◦    Transport constructions

◦    External pipework for water supply and sewerage system

◦    External pipework for water supply

◦    External pipework for sewerage system

◦    Thermal-mechanical solutions for the heating mains

◦    External gas pipework

◦    External lighting

◦    Power supply

◦    Automation

Moselectronproekt helps you in preparation for the expert examination at FAU Glavgosexpertiza of Russia (governmental expert examination).

The main services within the project guidance are as follows:

• Organization of the guidance through the governmental expert examination for the project
• Project documentation analysis in accordance with the requirements for the application for the governmental expert examination
• Audit for the completeness of the documentation package
• Recommendations for the elimination of the imperfections
• Control on the presence and contents of the project documentation sections (chapters)
• Expert conclusion for the elimination of the imperfections and correction of the documentation
• Cooperation while corresponding with FAU Glavgosexpertiza of Russia (governmental expert examination) to clarify the requirements
• Preparation of the answers to the reprimands of the expert examination
• Preparation of the summary volume for the changes in the project documentation in line with the answers to the reprimands

Support for the governmental expert examination results in the following:

Guidance of the project contributes to the confident passing through the expert examination and receipt of the positive conclusion.

Moselectronproekt has years of experience in providing general contractor services for building various radio-electronic productions, including cleanrooms, engineering systems, administrative facilities. At every stage of the construction works our personnel communicate with the customers, control the fulfillment of the works in accordance with the design estimates and in line with the deadlines.

Scope of Works:

• Selection of the best sub-contractors and signing the contracts with them
• Management of the dead-lines and the budgets of the executers
• Organisation of the micro infrastructure at the building site
• Organisation of the cooperation between the subcontractors at the building site
• Control over the safety regulations, ecological requirements, other legal requirements
• Machinery and materials logistics

Benefits for the customer with regard to the comprehensive realisation of the project are as follows:

• Responsibility for the final result of the project is within a single executor
• Easy coordination between the representatives of the design and building organizations
• Reduction of the expenditures thanks to taking into consideration the abilities of the building organisation within the design process
• Choice of the economic materials and technologies while designing
• Cutting down the project deadlines because of the straight-through project stages flow

Moselectronproekt provides technical supervision for your project or in accordance with the comprehensive contract for the construction or reconstruction works. While carrying out the works a strict control over meeting the requirements of CNiP12-01-2004 is made. 

Scope of Works:

• Control over conformity of the building and assembly jobs, applied constructions, products, materials and supplied equipment to the design solutions, requirements of the building standards, technical requirements and other regulation documents.
• Control over elimination of the discrepancies in the project documentation, revision of the documentation (if needed) and control over staying in the construction budget limits.
• Check on the presence of the documentation which confirms the quality of the constructions, goods, materials used for construction (technical certificates, results of the laboratory tests, etc).
• Assessment and examination of the intermediate results of the construction works and the construction units, which will be concealed at the next building stages, together with the representatives of the construction and assembly organizations, control over the prohibition of further works before signing the examination protocols for the concealed works.
• Organisation of the intermediate acceptance of the critical and major constructions of the buildings together with the representatives of the general contractor and specialized assembly organisation, as well as design organisation.
• Control over conformity of the quantity and quality of the works, which are conducted and invoiced, to the design estimates.
• Accounting of the quantity and costs of the accepted and paid construction and assembly works, as well as quantity and costs of the imperfect works and costs related to the elimination of the defects.
• Control over presence and correctness of the initial executive documentation (executed drafts while instrumental observation of the mounted constructions, building parts, constructions and engineering communications, general and special work registers) and implemented corrections because of the identified defects while carrying out building works.
• Control of the building organisations to assure that the requirements of the author’s supervision and governmental supervision as well as the requirements of the technical supervision of the customer, which are related to the quality of the works and applied constructions, materials and equipment, are observed, to ensure fixing the defects, which are found while accepting the building works, construction units, buildings and the whole project, in a timely manner.
• Participation in working committees (acceptation committees) to examine the quality of construction units, building and assembly works, equipment and devices.
• Participation in examination of the buildings and constructions to go under temporary closing-down, drawing up the documentation for temporary closing-down or temporary construction break, participation in technical state assessment of the facilities to transfer them to the construction organisations in order to continue the works. 

Moselectronproekt provides necessary technological solutions for your production, manages the issues related to the intellectual property and licensing. We have advanced experience in cooperation with the national and international leading developers of technology and technological solutions for specialized production types. 

 

 

Main Services

• Working out conception for the technological development
• Choice and justification of the technological solutions
• Choice of the technological equipment
• Choice of the compatible equipment in accordance with the features of the production capacity and flexibility

Leading Services

• Organisation of the development and supply of the technological equipment in line with the customers' requirements
• Development of the comprehensive productions with integrated solutions for automation and management
• Introduction of the energy effective engineering systems

Moselectronproekt provides complex supply of the equipment for the chosen technology. 

Scope of Works

• Order placement for the production and supply of the equipment
• Contracting with the suppliers
• Control over the fulfillment of the contractual deadlines
• Equipment acceptance
• Control over the conformity of the specification and technical characteristics to the contract
• Assembly supervision
• Installation works
• Operation initiation
• Adjustment of the technological processes to the supplied equipment
• Staff training

Recently Moselectronproekt has supplied and set into operation the following equipment for the complex projects:

While equipping the production Moselectronproekt choses only reliable suppliers of the equipment, who offer their own technical support within extended regional structure, posses spare parts stocks and provide technological services. Our partners have years of experience in design, support and development of the leading manufacturing productions; quality of their works and speed of troubleshooting are favourably reviewed.

Scope of Works

• Warranty and post-warranty services
• Systematic service works
• Technological support for the production
• Consultancy on the technological materials
• Consultancy on the technology optimisation

Moselectronproekt provides primary assessment and systematic examination of the cleanrooms and clean zones of your production, which are required to be held once a year or once a half year for the highest clean classes (according to GOST R 14644-2-2001). Our company carries out all the necessary tests after the exchange of the filters of the ultimate purification rate. The assessment of the cleanrooms is held with the use of the most modern equipment, which has the unique resolution ratio. A few companies who offer the cleanroom assessments have particle counters with a resolution of 0,1-5 micrometer, what is needed to assess the zones in line with classes 6 and 7 according to ISO. 
 

Scope of Works

• Determination of the aerosol particle concentration
• Determination of the air flow rate at the outdraught and at the inflow
• Determination of the pressure differential between the cleanrooms of different classes
• Examination of the filtering efficiency
• Visualisation of the air flows in clean rooms
• Determination of the illumination intensity, relative humidity and temperature

Cleanroom assessment results in the following:

• Receipt of the examination protocol
• Conclusion on the conformity of the cleanroom to the norms
• In case of the divergence determination, a list of the deviations accompanied by the recommendations for the improvements will be provided